Brookhaven's NanoBrook Omni instrument combines the best technology from our particle/protein sizer and zeta potential analyzer in to one powerful and accurate solution for sizing and zeta potential analysis. Measure samples in nearly every possible suspension environment from high salts such as PBS and sea water to organic solvents and of course aqueous solutions. Particle and protein sizing, with the highest sensitivity, utilizing three measurement angles for truly unbiased measurement results. The NanoBrook Omni utilizes a backscattering angle as well as 90° and 15°.
Brookhaven's NanoBrook 173Plus instrument is the go-to-solution for characterization of proteins, antibodies, nanoparticles, macromolecular assemblies and other molecules/particles of small sizes. The NanoBrook 173Plus uses backscattering detection for the highest sensitivity and accuracy optimized for molecules and particles less than a few tens of nanometers. Detection at 90° is used for larger particles.
Brookhaven's NanoBrook 173 instrument is the go-to-solution for characterization of proteins, antibodies, nanoparticles, macromolecular assemblies and other molecules/particles of small sizes. The NanoBrook 173 uses backscattering detection for the highest sensitivity and accuracy optimized for molecules and particles less than a few tens of nanometers.
The NanoBrook 90Plus particle size analyzer incorporates all you need for fast, routine, sub-micron measurements. Based on the principles of Dynamic Light Scattering (DLS), most measurements only take a minute or two. Choose the optional avalanche photo diode (BI-APD) for weak scatters. The instrument can be upgraded later on to include zeta potential measurement. Please see the 90Plus Zeta and 90Plus PALS for instruments combining sizing and zeta potential.
The Brookhaven BI-DCP is a digitally controlled, high resolution, particle size distribution analyzer. It yields high resolution results in the size range from 0.01 to 30 microns with typical analysis times ranging from 5 to 30 minutes. The DCP softwareprovides easy instrument control, data analysis, and database management. The software is menu-driven and permits a variety of report formats.
BI-XDC X-Ray Disc Centrifuge
Based on first principle, the BI-XDC is the only X-Ray disc centrifuge that measures particle size without calibration or absorption correction. The high resolution instrument can resolve peaks as close as a 15% size differential and quantify distribution accurately. Homogeneous start with scanning head makes for quick measurements.
The BI-XDC is the ideal instrument for QC, QA and research. The instrument combines gravitational and centrifugal sedimentation for Claysfast, accurate size distribution from nanometers to tens of micrometers. The scanning X-ray head speeds up measurements for a typical 8 minutes measurement. The X-ray detection gives high accuracy, no optical corrections, quantitative measurements. The BI-XDC features a reproducible digitally controlled disk speed for best performance and accuracy. Merging the centrifuge and gravity mode covers a broad size range from 0.01 to 100 microns.
21CFR Part 11 Compliance Software
The 21CFR Part 11 Compliance software is for use with our family of light scattering instrumentation. This software has the ability to assign users with specific roles that are password protected to ensure that the measurements performed are tracked to a specific user. Other requirements to be compliant to 21CFR Part 11 include the ability to log activities by user and maintain the integrity of data by preventing any manipulation of it.
• User Specific, Password Protected, Roles
• Activity Log by User and Time Period
• Remote Database Access
Particle Solution Software
Designed to operate with NanoBrook series particle characterisation instruments, Particle Solutions software suite integrates characterisation of 5 different particle measurement technologies - DLS, SLS, Phase Analysis Light Scattering (PALS), micro-Rheology and Molecular Weight Determination in one package. The new version of this popular software suite for NanoBrook series particle characterisation instruments includes a host of useful new features. New features include Laboratory Information Management System support, Surface Zeta Potential measurement capability, Multimodal Size Distribution refinement, Health Mode post-measurement analysis, and Statistical Process Control. Safeguarding the investment of existing users - measurements made with earlier versions of the software can be imported into Particle Solutions, and then analyzed with the same powerful tools.
Note: Particle Solutions is only usable with Brookhaven Instruments light scattering systems.